Start
This provides the same function as clicking the Start Button. Selecting "Start" begins data logging with the specified sample rate and Voltage saturation limit.
Stop
This option provides the same functionality as the Stop Button. Selecting "Stop" will terminate data logging.
Channel A
Selecting Channel A will enable or disable channel A in the same way as clicking the Channel Enable button for channel A. When the channel is enabled, a tick is visible next to the channel name.
Channel B
Selecting Channel B will enable or disable channel B in the same way as clicking the Channel Enable button for channel B. When the channel is enabled, a tick is visible next to the channel name.
TestMode
Selecting TestMode activates the EasyLogger test mode in the same way as the TestMode Waveform button from the main toolbar. This creates a saw-tooth waveform with a frequency of 30.518Hz.
SigGen
Selecting SigGen brings up the Signal Generator Window for configuring the signal generator output. This has the same functionality as the Signal Generator button on the main toolbar.
Clear Screen
Selecting Clear Screen removes all data from the data chart. This option is disabled if the load chart is selected.