Table of Contents
Keyword Index
 | Welcome to the USB Instruments Knowledgebase |
 | DS1M12 |
| EasyScope II for DS1M12 Help |
| Introduction |
| Welcome to EasyScope II for DS1M12 |
| EasyScope II Features |
| Installing EasyScope II |
| Installing the EasyScope II Software |
| Installing the USB Drivers |
| Using EasyScope II |
| EasyScope II Overview |
| Front Panel Functions |
| Run/Stop and Single Buttons |
| Timebase Settings |
| Input Gain Settings |
| GND Reference |
| Trigger Settings |
| AC/DC Coupling |
| Invert |
| Output |
| Horizontal Slide Bar |
| XY |
| FFT Display |
| FFT Overview |
| Man |
| Averaging |
| Zero Pad |
| File Menu |
| FFT Window Menu |
| Spectrum Menu |
| Signal |
| Meter A and Meter B |
| Cursor X |
| Cursor A and Cursor B |
| Auto Set |
| Menu Functions |
| File Menu |
| Screen Menu |
| Cursors Menu |
| Samples Menu |
| Trigger Menu |
| Tools Menu |
| Help Menu |
| Quitting EasyScope II |
| Appendix |
| Error Messages |
| File Not Found |
| Failed to Configure DS1M12 |
| DS1M12A B Not Found ... |
| FT_Write - General IO Error... |
| FT_GetQueueStatus - General IO Error... |
| Uninstalling EasyScope II |
| EasyLogger for DS1M12 Help |
| Introduction |
| Welcome to EasyLogger for DS1M12 |
| EasyLogger Features |
| Installing EasyLogger |
| Installing the EasyLogger Software |
| Installing the USB Drivers |
| Using EasyLogger for DS1M12 |
| EasyLogger Overview |
| Front Panel Functions |
| Start Button |
| Stop Button |
| Sample Interval |
| Channel Enable Buttons |
| Slide Bar |
| Scale Panel |
| Toolbar Buttons |
| Open Chart |
| Save Chart |
| Print Chart Area |
| Copy Chart to Clipboard |
| Zoom In/Out |
| Zoom Full |
| Cursors |
| TestMode Waveform |
| Signal Generator |
| Memo Window |
| Info Window |
| X-Control Window |
| Y-Control Window |
| Sub Panel Functions |
| Signal Generator Window |
| Memo Window |
| Info Window |
| X-Control Window |
| Y-Control Window |
| Menu Functions |
| File Menu |
| Run Menu |
| Edit Menu |
| View Menu |
| Window Menu |
| Help Menu |
| Quitting EasyLogger |
| Appendix |
| Error Messages |
| RBF File Not Found |
| Failed to Configure DS1M12 |
| DS1M12A B Not Found ... |
| FT_Write - General IO Error ... |
| FT_GetQueueStatus - General IO Error ... |
| Uninstalling EasyLogger |
| DS1M12 Interfacing DLLs |
| DS1M12 Oscilloscope DLL |
| Introduction |
| DS1M12 Functions |
| DS1M12_GetNumDevices |
| DS1M12_GetDeviceSerialNumber |
| DS1M12_OpenSpecifiedDevice |
| DS1M12_OpenDevice |
| DS1M12_CloseDevice |
| DS1M12_InitDevice |
| DS1M12_ProgramDevice |
| DS1M12_IsDeviceProgrammed |
| DS1M12_SetDeviceChannelState |
| DS1M12_StartDeviceChannelScan |
| DS1M12_GetDeviceChannelData |
| DS1M12_SetDeviceFunctionGeneratorState |
| DS1M12_GetWaveformFrequencyValues |
| DS1M12_SetDeviceFunctionGeneratorWaveform |
| DS1M12_GetDllVersion |
| DS1M12_GetErrorCodeString |
| DS1M12.h |
| DDL1M12 Data Logger DLL |
| Introduction |
| DDL1M12 Functions |
| DDL1M12_GetNumDevices |
| DDL1M12_GetDeviceSerialNumber |
| DDL1M12_OpenSpecifiedDevice |
| DDL1M12_OpenDevice |
| DDL1M12_CloseDevice |
| DDL1M12_InitDevice |
| DDL1M12_ProgramDevice |
| DDL1M12_IsDeviceProgrammed |
| DDL1M12_SetDeviceChannelState |
| DDL1M12_StartDeviceDataLogging |
| DDL1M12_StopDeviceDataLogging |
| DDL1M12_GetDeviceChannelData |
| DDL1M12_SetDeviceFunctionGeneratorState |
| DDL1M12_GetWaveformFrequencyValues |
| DDL1M12_SetDeviceFunctionGeneratorWaveform |
| DDL1M12_GetDllVersion |
| DDL1M12_GetErrorCodeString |
| DDL1M12.h |
| PS40M10 |
| PS40M10 Specification |
| PS40M10 Swordfish Specification |
| Glossary |
| EasyScope II for PS40M10 Help |
| Introduction |
| Welcome to EasyScope II for PS40M10 |
| EasyScope II Features |
| Installing EasyScope II |
| Installing the EasyScope II Software |
| Installing the USB Drivers |
| Using EasyScope II |
| EasyScope II Overview |
| Front Panel Functions |
| Run/Stop and Single Buttons |
| Timebase Settings |
| Input Gain Settings |
| GND Offset |
| Trigger Settings |
| AC/DC Coupling |
| Invert |
| Horizontal Slide Bar |
| Illuminate |
| FFT Display |
| FFT Overview |
| Man |
| Averaging |
| Zero Pad |
| File Menu |
| FFT Window Menu |
| Spectrum Menu |
| Meter Display |
| Timing Cursor |
| Y Cursor |
| Auto Set |
| Menu Functions |
| File Menu |
| Screen Menu |
| Cursors Menu |
| Trigger Menu |
| Tools Menu |
| Help Menu |
| Quitting EasyScope II |
| Appendix |
| Error Messages |
| File Not Found |
| Failed to Configure PS40M10 |
| PS40M10A B Not Found ... |
| FT_Write - General IO Error... |
| FT_GetQueueStatus - General IO Error... |
| Uninstalling EasyScope II |
| EasyLogger for PS40M10 Help |
| Introduction |
| Welcome to EasyLogger for PS40M10 |
| EasyLogger Features |
| Installing EasyLogger |
| Installing the EasyLogger Software |
| Installing the USB Drivers |
| Using EasyLogger for PS40M10 |
| EasyLogger Overview |
| Front Panel Functions |
| Start Button |
| Stop Button |
| Sample Interval |
| Slide Bar |
| Scale Panel |
| Toolbar Buttons |
| Open Chart |
| Save Chart |
| Print Chart |
| Copy Chart to Clipboard |
| Zoom In/Out |
| Zoom Full |
| Cursors |
| TestMode Waveform |
| Memo Window |
| Info Window |
| X-Control Window |
| Y-Control Window |
| Sub Panel Functions |
| Memo Window |
| Info Window |
| X-Control Window |
| Y-Control Window |
| Menu Functions |
| File Menu |
| Run Menu |
| Edit Menu |
| View Menu |
| Window Menu |
| Help Menu |
| Quitting EasyLogger |
| Appendix |
| Error Messages |
| File Not Found |
| Failed to program Pen Scope Hardware |
| PS40M10A B Not Found ... |
| FT_Write - General IO Error ... |
| FT_GetQueueStatus - General IO Error ... |
| Uninstalling EasyLogger |
| PS40M10 Interfacing DLLs |
| PS40M10 Oscilloscope DLL |
| Introduction |
| PS40M10 Functions |
| PS40M10_GetNumDevices |
| PS40M10_GetDeviceSerialNumber |
| PS40M10_OpenSpecifiedDevice |
| PS40M10_OpenDevice |
| PS40M10_CloseDevice |
| PS40M10_InitDevice |
| PS40M10_ProgramDevice |
| PS40M10_IsDeviceProgrammed |
| PS40M10_SetDeviceLedState |
| PS40M10_StartDeviceChannelScan |
| PS40M10_GetDeviceChannelData |
| PS40M10_GetDllVersion |
| PS40M10_GetErrorCodeString |
| PS40M10.h |
| PDL40M10 Data Logger DLL |
| Introduction |
| PDL40M10 Functions |
| PDL40M10_GetNumDevices |
| PDL40M10_GetDeviceSerialNumber |
| PDL40M10_OpenSpecifiedDevice |
| PDL40M10_OpenDevice |
| PDL40M10_CloseDevice |
| PDL40M10_InitDevice |
| PDL40M10_ProgramDevice |
| PDL40M10_IsDeviceProgrammed |
| PDL40M10_SetDeviceLedState |
| PDL40M10_StartDeviceDataLogging |
| PDL40M10_StopDeviceDataLogging |
| PDL40M10_GetDeviceChannelData |
| PDL40M10_GetDllVersion |
| PDL40M10_GetErrorCodeString |
| PDL40M10.h |
| Frequently Asked Questions |
| PS40M10 FAQ |
| Hardware |
| What does the "Measuring High Voltages" section of the Getting Started Guide mean? |
| What does the "Fuse blown in Swordfish PS40M10 GND circuit" message mean? |
| Can the Swordfish PS40M10 be used with a USB 2.0 Host? |
| Where can I find the USB drivers for the Swordfish PS40M10? |
| Can the Swordfish PS40M10 be connected to a Bus Powered hub? |
| Can two Swordfish PS40M10 units be used to create a two channel oscilloscope? |
| Can two or more Swordfish PS40M10 units be used at the same time on the same PC? |
| Can the Swordfish PS40M10 and Stingray DS1M12 be used at the same time on the same PC? |
| What is the input impedance of channel A? |
| Is there galvanic isolation between the PS40M10 and the PC? |
| Can I connect the ground lead on the PS40M10 oscilloscope probe to any point on my circuit under measurement? |
| How can I measure the voltage across a device if one end of the device is not at GND potential? |
| What is the maximum measurable input voltage for the Channel A? |
| Is a calibration verification specification available? |
| EasyScope II for PS40M10 |
| Why is the 'Failed to Configure PS40M10' error message displayed? |
| What is the data entry in the last row of a saved CSV file? |
| How can I measure the vertical sync pulse of a video signal? |
| What is the sample size of the PS40M10? |
| How do I obtain accurate amplitude information in the FFT display? |
| How do I obtain accurate frequency information in the FFT display? |
| How can I compensate a X10 probe on the Swordfish? |
| Where is the XY Mode? |
| What parameters can the meter display? |
| EasyLogger for PS40M10 |
| What is the maximum sampling rate on the EasyLogger application? |
| What are the storage requirements for the Logger? |
| User Application Support |
| Can I create my own applications? |
| How can I get the 3rd party interface DLL and code examples? |
© USB Instruments Ltd. 2006